RAM® Tough-Dock™ Power + Data for Zebra ET401 & ET4x 10″
Item number: RAM-HOL-ZE21PDU
RAM® Tough-Dock™ Power + Data for Zebra
- RAM® Tough-Dock™ z zasnovo EZ-Roll’r™ omogoča podatkovno povezljivost in polnjenje za tablice Zebra ET401 z RAM® Skin™ ter ET40 in ET45 10″ z ojačanim (Rugged) okvirjem preko DC 5,5 mm priključka in USB Type-A za priklop perifernih naprav; preizkušeno po standardu MIL-STD-810G za odpornost na udarce in vibracije.
- Ko je dok priključen na vir napajanja, integrirani pogo pini zagotavljajo napajanje napravi, medtem ko je tablica nameščena v doku. Dok omogoča tudi uporabo dodatkov za tablico, kot sta Expansion Back in PowerPack Battery, pri čemer funkcija skeniranja deluje tudi med uporabo v nosilcu.
- Združljiv je z RAM® bazami velikosti C in D s 4-luknjičnim AMPS vzorcem ter z VESA vzorcem 75 × 75 mm za pritrditev dvojne ročice; tehnologija kroglice in ležišča omogoča skoraj neskončno prilagodljivost.
- Vgrajena 2-luknjična montažna plošča omogoča dodatno montažo naprav, kot je telefon; združljivo z RAM® 2-luknjičnimi diamantnimi bazami in stranskim nosilcem za dodatke.
- Podprto s 3-letno garancijo
Featuring data and charging capabilities, the RAM® Tough-Dock™ for Zebra ET40 & ET45 10″ enterprise tablets with Rugged Frame allows you to connect a desired peripheral while keeping the device charged through the pogo pin contacts when the device is docked. Power is provided by connecting to the dock’s 5.5mm DC power jack, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet’s scanning function to work on the side, as well as tablet add-ons such as the Zebra Expansion Back and PowerPack Battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm in order to complete your mounting solution. Take the solution a step further by taking advantage of the built-in 2-hole mounting plate compatible with RAM® 2-hole diamond base for additional device mounting such as a phone or other handheld device.
RAM® Tough-Dock™ Power + Data for Zebra
Hardware included:
- (1) Side bracket for accessory mounting
- (4) #8-32 x 5/8” Machine Screws
- (2) #8-32 x 1/2” Machine Screws
- (6) #8-32 Nylock Nuts
- (4) #10-24 x 5/8” Machine Screws
- (4) #10-24 Nylock Nuts
- (2) Small Cable Ties
Hole pattern:
- 75 x 75mm VESA
- 4-Hole AMPS: 1.181″ x 1.496″
Materials:
- High strength composite
Packaging type:
- Poly Bag
Input connector:
- 5.5mm DC Connector
Input cable length:
- 1 Meter
Output connector:
- USB 2.0 Type A
Output cable length:
- 242mm
Peripheral output:
- 500mA
Transfer speed:
- 12Mbps
Certifications:
- RoHS
- WEEE
- CE
- UKCA
Warranty:
- 3 year warranty
Weight:
- 1.55 lb
Compatible with following devices:
Zebra
ET401 10″ Tablet (RAM® Skin™ Required)
ET40 10″ Tablet with Rugged Frame
ET45 10″ Tablet with Rugged Frame
Related products
